EXAIR's new 1-1/4 NPT Super Air Nozzle™ delivers 9.4 pounds of strong blowing force when mounted 12” away from the target. The force is more than 12 times that of ordinary air nozzles, making it ideal for blowing heavy materials or for applications where the air nozzle can’t be mounted close to the surface to be blown off, dried or cooled.
The compressed air is ejected through a series of holes located in recessed grooves on the nozzle surface. The aerodynamic design of the 1-1/4 NPT Super Air Nozzle directs the air to a single point of convergence, delivering a concentrated stream of high velocity airflow with hard- hitting force. This assures safe operation since the airflow that exits the nozzle can not be blocked, as required by OSHA standard 1910.242(b). At 80 PSIG, the air consumption is 188 SCFM. The typical sound level reduction from ordinary open pipe is 27 dBA, bringing the noise to acceptable levels required by the OSHA maximum allowable noise exposure standard 29 CFR 1910.95(a).
The zinc aluminum alloy construction makes the 1-1/4 NPT Super Air Nozzle suitable for rugged industrial applications. A 2” (51mm) hex body is provided for easy installation using a standard wrench or socket. Applications include ejection of heavy parts, drying, machinery and parts cleaning, chip removal, liquid blowoff, and cooling hot parts.
For more information contact:
EXAIR Corporation
11510 Goldcoast Dr.
Cincinnati, OH 45249-1621
Phone: (800) 903-9247
Fax: (513) 671-3363
E-mail: [email protected]
www.exair.com/lgsan.htm
