A family of four all-purpose, double sided stock trucks, featuring adjustable shelves and see-through mesh construction has been introduced by Durham Manufacturing Company, Durham, CT.
Four adjustable 14 gauge steel shelves, two on each side, can be flat or tilted inward to keep stock from sliding or falling off during transport. The base bottom shelf is flat and stationary and designed with lip-up to hold items securely in place. Punched 14 gauge steel sides result in lighter overall weight and good visibility for the operator without any sacrifice in strength. The heavy duty, all welded construction, 14 gauge steel shelves, steel sides and solid center dividers combine to create a versatile workhorse of a carrier. Four phenolic 6 inch by 2 inch bolt-on casters, 2 swivel and 2 rigid, are basic to the ability of the trucks to carry loads up to 2,000 lbs. They are mounted in a diamond pattern as an aid to maneuverability. Being able to make sharp turns is essential in areas where space is tight or aisles are narrow. The series is available in four sizes ranging from 36 inches wide by 24 inches deep to 60 inches wide by 30 inches deep. All models are 48 inches high above the deck. Finish is durable gray powder coat which is rust and corrosion resistant. Ships fully assembled, ready for use.
For details; write, phone, fax or email: Adjustable Shelf Mesh Stock Truck
Durham Manufacturing Company
201 Main Street, P.O. Box 230
Durham, CT 06422
Toll Free Phone: 800-243-3774
Toll Free Fax: 800-782-5499
Email: [email protected]
Website: www.durhammfg.com
